Atlas Copco ErgoPulse Non-shut-off

Atlas Copco ErgoPulse non-shut-off pneumatic pulse tools deliver fast, powerful and low-reaction tightening for automotive and industrial assembly applications.

Discuss Your Application
Atlas Copco ErgoPulse non-shut-off pneumatic pulse tools for automotive and industrial assembly

    Atlas Copco ErgoPulse Non-Shut-Off Pneumatic Pulse Tools

    Atlas Copco ErgoPulse Non-shut-off tools are pneumatic pulse tools designed for professional fastening and repetitive industrial assembly applications. The range includes different torque capacities, drive configurations and tool designs, allowing buyers to select a model according to the required fastening torque, bolt size, available working space and compressed-air system.

    Models in the ErgoPulse Non-shut-off range are available in both pistol and straight configurations. Pistol models are suited to applications where conventional hand positioning and access are preferred, while straight models provide an inline configuration that can be useful at assembly stations where the tool needs to approach the fastening point directly.

    Choosing the Right ErgoPulse Non-Shut-Off Tool

    The most important factor when selecting an ErgoPulse tool is the required torque range. Different models are designed for substantially different fastening requirements, so the application's target torque should be compared directly with the minimum and maximum torque specification of the individual tool.

    Buyers should also check the specified bolt size and output configuration. Depending on the model, ErgoPulse Non-shut-off tools may use male square drives or female hexagon outputs in different sizes. The socket, bit and fastening system used on the production line should therefore be confirmed before selecting a model.

    Pistol and Straight Models

    The ErgoPulse Non-shut-off range includes pistol-type and straight-type tools. Pistol models provide a conventional grip orientation for manual fastening operations, while straight versions offer an inline body layout for applications where access, workstation geometry or tool positioning requires a different configuration.

    Tool dimensions are also important. Overall length, CS distance and weight vary between models and should be checked when the fastening point is located inside restricted spaces or when the tool will be used repeatedly throughout a production shift.

    Torque, Speed and Fastening Capacity

    Across the models listed in this category, different torque ranges are available for light, medium and higher-torque fastening requirements. The listed ErgoPulse models cover applications from smaller M6 fasteners through larger bolt sizes such as M20, depending on the selected model.

    Free speed also varies between models. Higher-speed tools can be appropriate where rapid rundown is an important part of the fastening cycle, while higher-torque models may use a lower free speed. Torque capacity and speed should therefore be evaluated together rather than selecting a tool based on either specification alone.

    Compressed-Air Requirements

    ErgoPulse Non-shut-off tools operate from a compressed-air supply, so the pneumatic system should be checked before installation. Important specifications include nominal working pressure, maximum working pressure, air consumption under load, recommended hose size and air inlet thread.

    Many of the models listed in this category specify a nominal working pressure of 6.3 bar. However, air consumption and recommended hose diameter vary between models, particularly as tool size and torque capacity increase. The available compressor capacity, pressure at the workstation and airline dimensions should therefore be matched to the individual model specification.

    Noise, Vibration and Technical Standards

    Where specified for the individual model, product data includes sound pressure, sound power, vibration value and measurement uncertainty. Noise information is listed according to ISO15744 and vibration data according to ISO28927-2.

    Individual ErgoPulse models may also list EAC certification, EU Directive 2006/42/EC, EN ISO 11148-6:2012 and UK legislation S.I. 2008/1597. Buyers requiring specific compliance documentation should check the technical specifications of the exact model being considered.

    What to Check Before Ordering

    Before selecting an Atlas Copco ErgoPulse Non-shut-off tool, confirm the required torque range, bolt size, output type and drive size. Then compare the tool's free speed, body configuration, overall dimensions and weight with the requirements of the assembly station.

    The compressed-air supply should also be verified for the required operating pressure, airflow, hose size and connection. Checking these specifications before ordering helps ensure that the selected tool is compatible with both the fastening application and the existing production setup.

    Atlas Copco Pneumatic Assembly Tools

    ErgoPulse Non-shut-off models form part of the wider Atlas Copco Pneumatic Assembly Tools range available from Middle East ABC. Buyers can compare the individual products in this category to find the appropriate combination of torque range, drive configuration, tool design, speed and pneumatic requirements for their assembly process.

    ErgoPulse Non-Shut-Off Availability

    Contact Middle East ABC for product information, model comparison, availability and quotation support for Atlas Copco ErgoPulse Non-shut-off pneumatic pulse tools and other Atlas Copco assembly solutions.